19” GERMAN RACK
19” GERMAN RACK G3-Series
• Designed and Manufactured to comply with the standard of ANSVEIA-310D 1992 (Rev EIA-310c). IEC60297-1, IEC60297-2, BS5954 Part 2, DIN 41494.
• Modular Knock down System in order to be delivered conveniently. VCD manual displaying every step of assembly s provided.
• Produced from Electro-Galvanized Sheet Steel with thickness of 1.5 mm. Mounting Pole, frame structure and base made of 20 mm. Electro-galvanized Sheet Steel. Castor Base stand made of 30 mm. steel, 100% rust proof.
• The structure mounted as wedge lock for strength increasing.
• Mounting Pole was designed to be C-shape Angie in order to increase the strength. Punching of square mounting hole 10 x 10 mm. on both flange. They can be adjusted in/out freely to meet customer’s needs. And provide the U-height screened on the mounting pole.
• Front Door is the steel frame with acrylic 5.0 mm. thicknesses with film protection and the width of acrylic is 38 cm. (the height is being influenced by the size of the rack). Door edge is bore with gray dust-proof rubber seal (3 fins). Top the front door has embossed trademark. Security locks with 19” Germany Master Key
• Rear Door is the steel door with 34 x 23 cm. dust-proof screen of ventilation slot at the bottom. Inside the rear door T-frame 70 mm. width mounted to prevent the door from swinging. Door edge is also bore with gray dust-proof rubber seal (3 fins). Security locks with 19” Germany Master Key which is the same set as the front door.
• Hinge is 19” Germany Export Rack products made from 3 pieces of high strength special PVC (ABS), rust-free and without any interfering noise. The reversibility of front and rear door opening from left of right by adjusting at one screw nut of hinge.
• Side Panels are steel with two handles of 19” Germany slide latch on the top part in order to easily removable. Inside the side panel has the vertical frame 70 mm. width mounted to prevent the panel for strengthen. Securities lock with 19” Germany Master Key which is the same set as the front door.
• Root Cover can be mounted with various types of single, dual and triple ventilating fans which can be maximum mounted 6 ventilating fans and can also be changed to vent raised roof cover in option.
• Base has the same width and depth of cabinet to fully supportive to all the weight. The bottom is three parts plinth with side shutter for able entry and gray sponge to protect any inner-passing by animals, any kind of ventilating tan can be equipped them as well.
• Pedestal was equipped with the castor base and is adjustable; by all of the 4 Pedestals base made of black ABS and can be freely adjustable 180 degree to suit the slope and pr all effects from Electrostatic and earth leakage
• Castor is 19” Germany Export Rack made of black nylon six with the diameter of 50 mm; equipped on the 360 degree swivel that allow to be moving conveniently with capacity the static load 150 kg per castor
• New Shine Light Gray Two-Tone color by Electrostatic powder coating paint for scratch resistance.
• Grounding with color stripe green and yellow copper wire 2.5 mm; connecting between all removable parts of Rack.
• Screw Set composes of screws, captive nuts, and plastic washer; by each were coated with nickel and M6 thread system.
• Static load rating 1,200 kg certificated by KMUTT. The result shall be less than 3.0 mm. or 0.14%
• Manufacturing and Distribution by ISO 9001:2008 Company.
